What is VTP ?
1. Introduction
VLAN Trunking Protocol (VTP) is a Cisco proprietary protocol used to manage the VLAN configuration. VLANs are used to segment different types of traffic so that different groups of computers can communicate with each other. VTP is a service that is used to manage these VLANs. VTP does not apply to the physical layer of the network.
2. What is VTP
VLAN Trunking Protocol (VTP) is a Layer 2 protocol that is used to manage the VLANs on a Cisco device. VTP is used to change the VLAN ID, VTP server, VTP domain name, and VTP pruning. Once a VTP server is configured, it can be configured to be the VTP master or VTP client. The VTP client will then send out VTP advertisements to the other devices on the network. The VTP advertisements are used to change the VTP configuration of the devices. The VTP advertisements are sent out every 30 seconds. The VTP advertisements are sent out to all other devices on the VTP domain. The VTP advertisements are sent out with the VTP version, VTP mode, and the VTP server name. The VTP advertisements can be received on a VTP client or a VTP master.
VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model. It’s used to propagate VLAN information throughout the network. VTP is a protocol that works on the layer 2 of the OSI model
CCNA LAB configuration of 2,3,4 Routers: Click here
4. Conclusion.
In order to implement VLAN Trunking Protocol, you need to create a VLAN configuration. This is done through the use of a VLAN database. If you want to implement VTP, you will need to create a VTP configuration. When you create the configuration, you will need to decide what VTP mode you want to use. There are four different VTP modes: server, client, transparent, and VTP version 2. The VTP server mode is the default mode and the one you will want to use the most. The VTP client mode is used when you have multiple VTP servers on the same network and you want to give them different configurations. The transparent mode is used when you want your VTP peers to be able to communicate with each other without any configuration. Lastly, the VTP version 2 mode is used when you want to implement VTP version 2 on your network.